DIYmall 0.96’’ OLED works with NodeMCU

What you need:
1PCS 0.96” OLED
4P Female to Female Dupont Cable

0.96” OLED               Nodemcu
VCC                                 3V3
GND                                GND
SCL                                 D1
SDA                                D2

Code download link:

Once download, please choose ssd1306_128X64_i2c in the example, in the code, there are 2 lines you need change as below:

#define OLED_RESET -1 // Reset pin # (or -1 if sharing Arduino reset pin)

if(!display.begin(SSD1306_SWITCHCAPVCC, 0x3C)) { // Address 0x3D for 128×64

Amazon Link

Website Link

Alibaba Link

Tutorial link

ESP8266 0.96 inch OLED Display with Arduino IDE

Any question please email