3.2″ TFT LCD Module Display ILI9341 for Arduino Mega 2560

This 3.2″ TFT LCD display module, with driver chip ILI9341, works at 3.3V (this is very important).
Therefore, if you use it with mega 2560, please insert TFT 3.2 LCD expansion shield, not directly connect board with the 3.2 inch screen. Otherwise, it’ll be burned.

What you need:
1 X 3.2″ TFT LCD Module
1 X TFT Mega Touch LCD Shield Expansion Board
1 X Mega 2560 R3 board with USB cable

PS: Install the arduino IDE if your PC has not installed before.

Connection:

Follow below steps to download the code and upload to the Arduino board.

1, Download code of TFT_HX8357 Master from github.
Code: https://github.com/Bodmer/TFT_HX8357

2, Add the zip file to Arduino IDE
Sketch-Include Library-Add .ZIP Library

3, Open Arduino IDE, choose one of the example code and upload to the mega 2560 board.
File-Example-TFT_HX8357-UTFT_Demo_480x320.
Note: before you upload the example code, please make sure that you choose correct board and COM port.

Video link:
https://youtu.be/uVrsCgTm4rY

Purchase link:

1, (lcd only) 3.2″ TFT LCD touch screen display module ILI9341:

https://www.diymalls.com/3.2-inch-TFT-LCD-Display-Module-Touch-Screen-Panel-ILI9341

2, (lcd + shield) 3.2″ TFT LCD display module with TFT LCD Mega Shield:

https://www.diymalls.com/3.2-inch-TFT-LCD-Display-Module-with-TFT-LCD-Mega-Shield

3, Mega 2560 development board with USB cable:

https://www.diymalls.com/DIYmall-2560-R3-Development-Board-ATmega2560-16AU

 

**************************************************************************************

If you need discounts for mass quantity order, or need customize the lcd screen, please feel free to contact us by email:

Jane: sales@diymalls.com
Betty: Betty@unikelc.com

*************************************************************************************