U-blox 7 vk-172 gps module can not get correct readings

Recently, one customer complained:

I bought a U-blox 7 from you and I’m giving it some tests right now and I’m not getting correct readings from it. I’m an application developer and I had to add a compensation element to both latitude and longitude in order to get “correct” readings from it.

GPS data to google data need conversion

Here is the link about how to do it https://drive.google.com/open?id=1MwNTrqJtst3Dpl9qH8Mt3UJhs87ODdf9

DIYmall VK-172 GPS Module u-blox 7020

The DIYmall Vk-172 is a pocket-sized unit that reads global signals and transmits that data to your computer via USB cable. It’s an especially interesting tool for people developing cutting-edge micro computers, like the Raspberry Pi or Android Mini PC.

It use u-blox 7020 chipset.
It can support Windows Andorid Linux sytem, Raspberry PI and EMGRAND car

Windows Driver Link: https://www.u-blox.com/en/product/u-center-windows
Android driver https://www.u-blox.com/en/product/u-center-androidor
https://play.google.com/store/apps/details?id=com.ublox.ucenter
Russia driver: http://www.drive2.ru/l/5033334/

It is  recommended by ezvid website:
https://wiki.ezvid.com/best-gps-antennas

amazon link https://www.amazon.com/dp/B00NWEEWW8

DIYmall Ublox NEO-6M Arduino GPS Module with EEPROM

 

 1   Please solder the pin header, then connect like this
GPS module        Arduino
VCC                            5V
GND                          GND
RX                              4
TX                               3

2     Connect UNO R3 to your computer
y
ou can download library from this link:
https://github.com/mikalhart/TinyGPSPlus
as the default baud rate for this gps module is 9600, so you need change static const uint32_t GPSBaud = 9600 to static const uint32_t GPSBaud = 4800, after uploading the code, you can open the serial monitor , please choose Both NL&CR 115200 baud, then you can get the GPS , below is the information I got:

 

Any question please feel free to contact

Email:sales@diymalls.com
Skype:freezone992
Phone/Whatsapp/Wetchat:0086-18576406709

Website:www.diymalls.com

Amazon link https://www.amazon.com/dp/B01H5FNA4K

Aliexpress link

Replace VK16E GMOUSE Arduino GPS Module U-BLOX UBX-G7020-KT G28U7FTTL Tutorial

Today we will learn use how to use arduino GPS module

1.Please solder the pin header, then connect like this
GPS module             Arduino

VDD(red line)               5V
GND (black line)         GND
RXD(blue line)              3
TXD(green line)            4

 

2. Connect UNO R3 board to computer.
You can download library from this link:
https://github.com/mikalhart/TinyGPSPlus
as the default baud rate for this gps module is 9600, so you need change static const uint32_t GPSBaud = 9600 to static const uint32_t GPSBaud = 4800, after uploading the code, you can open the serial monitor , please choose Both NL&CR 115200 baud, then you can get the GPS , below is the information I got:

You need to solder the pin header to the cable first

You can download arduino gps module code from   https://github.com/mikalhart/TinyGPS

Any question please feel free to contact

Email:sales@diymalls.com
Skype:freezone992
Phone/Whatsapp/Wetchat:0086-18576406709
Website:www.diymalls.com
amazon link  https://www.amazon.com/G/dp/B015R62YHI
ebay link   http://www.ebay.com/itm/172775394259