Sparekleiot Smart Plug for Apple Homekit

Specification:
Input: 110-250V, 50/60Hz
Output: 110-250V, 50/60Hz, 10A maximum load
Max power:2000W
Button: On/Off Button, press and hold for 5 seconds to initiate factory reset process(LED blink fast)
Wi-Fi Required: WiFi 802.11 b/g/n 2.4G (2.4G ONLY)
Compatible with:Apple Homekit
APP: Home
Voice control: Siri
Works with:iPhone/iPad

Please connect your iPhone/iPad with 2.4G WiFi network, open iPhone/iPad Bluetooth


After power it, long press the button of smart plug over 5S until you see the indicator light blink fast

Open Home APP, click icon “+” to Add or Scan Accessory, scan the QR code of the plug


It will take a few seconds to add the switch:

Once added successfully, it will show below page:

You can choose the switch location and rename the switch



At last you can add it to home

You can control it by hand in APP or by Siri

Automation:
You can add HomePod、HomePod mini、Apple TV、or iPad as the center of your home. Control Homekit-enabled accessories remotely, grant access to the people you trust, and automate accessories to do what you want, when you want.
How to set up a home hub?
https://support.apple.com/en-us/HT207057

FAQ
Q: How to reset the plug to the default factory mode?
A: Long press the button of the smart plug over 5s and the indicator light will blink fast.

Q: Does this plug have Homekit Certification?
A: Yes, it has

Q: Does it work with 5G Router?
A: This Homekit Smart Plug does not support 5G router, it only support 2.4G router. If your router is dual frequency, please set different passwords for 2.4G signal and 5G signal or turn off 5G signal. Please remember do not open the function of dual-frequency combination.

Q: It said: Unable to add Accessory Connect to a 2.4GHz WLAN network and try again. How to solve this problem?
A: Please connect your phone with 2.4GHz WiFi network.

Leave a Reply

Your email address will not be published. Required fields are marked *