Driver link: https://zadig.akeo.ie/
Video link: https://youtu.be/54cAKaolOQY
Connection like below, then connect it to the PC USB interface:
You can use 2.54mm Pitch Jumper Cap or DuPont Cable
Install driver: Driver name is Zadig
Options-choose List All Devices
Choose USBasp, Driver libsubK(v3.0.7.0) , you need click the drop-down menu to choose the correct driver
After install the driver successfully, you can open device manger and see the device as below:
Open AVRDUDESS and setting as below:
Programmer: Uptanium USBASP
Port: usb
MCU: ATmega8
Flash: choose hex you want to use
Click Detect, then click Go
Please pay attention about the print information in the window
It will show writing … Reading…, once done it will show avrdude.exe done. You can check the details as below:
Any question please contact via sales@diymalls.com
Website: www.diymalls.com
