Driver link:

Video link:

Connection like below, then connect it to the PC USB interface:
You can use 2.54mm Pitch Jumper Cap or DuPont Cable

Install driver: Driver name is Zadig
Options-choose List All Devices

Choose USBasp,  Driver libsubK(v3.0.7.0) , you need click the drop-down menu to choose the correct driver


After install the driver successfully,  you can open device manger and see the device as below:


Open AVRDUDESS and setting as below:
Programmer: Uptanium USBASP
Port: usb
MCU: ATmega8
Flash: choose hex you want to use
Click Detect, then click Go
Please pay attention about the print information in the window


It will show writing …   Reading…, once done it will show avrdude.exe done.  You can check the details as below:

Any question please contact via