This DoHome smart plug can work with iPhone’s Home APP, and you can control other devices via Siri directly
How to add the smart plug in Home APP?
When you plug it in and turn it on, you will look in your Wifi settings section for a device called HomeKit_XXXX. This is the DoHome plug
Connect to it.
Then the wifi network list will pop up automatically
If the list did not pop up, please open a browser and point to 192.168.4.1. The DoHome plug will then present you with a list of Wifi Networks that it sees.
Choose the one the you normally use, and supply the password. You should be returned to your browser, because the plug is on your regular network.
Use the HomeKit app in IOS to find your plug to add.
I don’t have a code or cannot scan
You should see your device labeled Switch-YYXXXX, where XXXX match the letters of the original DoHome network
Manual Code 12345678
Then the Switch-YYXXXX in your Home APP, you can change the name Switch-YYXXXX by yourself
Now, you can control it via Siri
Hi Siri, turn off the switch
Hi Siri, turn on the switch
NOTE: The network must be 2.4Ghz, this plug can not work 5Ghz
Here is the product page:
Any question please email firstname.lastname@example.org