Replace VK16E GMOUSE Arduino GPS Module U-BLOX UBX-G7020-KT G28U7FTTL Tutorial

Today we will learn use how to use arduino GPS module

1.Please solder the pin header, then connect like this
GPS module             Arduino

VDD(red line)               5V
GND (black line)         GND
RXD(blue line)              3
TXD(green line)            4


2. Connect UNO R3 board to computer.
You can download library from this link:
as the default baud rate for this gps module is 9600, so you need change static const uint32_t GPSBaud = 9600 to static const uint32_t GPSBaud = 4800, after uploading the code, you can open the serial monitor , please choose Both NL&CR 115200 baud, then you can get the GPS , below is the information I got:

You need to solder the pin header to the cable first

You can download arduino gps module code from

Any question please feel free to contact
amazon link
ebay link

Leave a Reply

Your email address will not be published. Required fields are marked *